OFL-G20 20W Dual Gooseneck Fiber Optic Cold LED Light Microscope Illuminator

20W LED with high luminous efficiency and high illuminance is used as the light source, and the bulb has a long life. Mainly by the light source
It is composed of parts, heat dissipation part, power supply part, chassis part, and so on.

This product is small in size, light in weight, and easy to carry with handle configuration. The fan has strong heat dissipation and is organically combined with the chassis cooling air duct to achieve fast and efficient heat dissipation.

This product adopts the power supply mode of wide voltage input and low voltage output, with stable performance, safety, and reliability.

Matched with Y-fiber or single rigid fiber, it can be used for microscope side illumination and industrial electronic inspection. Use with ring fiber for stereo microscope illumination

• Voltage: AC 90~240V 50/60Hz
• Input power: ≤20VA
• LED power: 20W
• LED Quantity: 1pc
• Fuse: F3AL250V
• Color temperature: 5000K-6000K
• Image plane illuminance: ≥1,600,000Lux
• Working temperature: -5℃-30℃
• Working humidity: 35%-75%
• Working atmospheric pressure: 700hPa-1060hPa
• Storage temperature: -40℃-55℃
• Storage humidity: 30%-80%
• Storage atmospheric pressure: 500hPa-1060hPa
• Lamp House Material: Aluminium
• Lamp House size: 165*90*125mm
• Length of the fiber arms: 510mm

Note: 
1. When the cold light source is working, it should be placed in a place with stable ventilation. Keep the object at a 15cm space distance.

2. When the light source is working, the power cable should be connected firmly, and no other objects should be placed on the chassis. Open pedestrian passages to avoid human factors affecting the work of the light source.

3. Do not allow the patient to touch the cold light source during work.
4. After the cold light source is turned on, do not look directly at the light guide output head or the light source output hole with the naked eye, to avoid eye damage.
Hurt.

5. During the operation of the cold light source, the temperature of the light output hole will rise, please do not touch it to avoid burns.

6. When the cold light source is not in use, it should be stored in a ventilated and dry place, and it needs to be covered with a protective cover to ensure
Dryness and cleanliness of the light source.

7. The cold light source should be regularly sterilized by ultraviolet rays and surface disinfected, and liquid or spray cleaners should not be used.

8. There is a high-voltage circuit in the machine, and non-professionals are not allowed to open the case.